今天安裝redis出現些之前安裝不曾出現錯誤,一并在此做個記錄
一、安裝redis及出現錯誤
首先下載redis,官方下載地址頁面:https://redis.io/download
我們這里選擇穩定版6.0.1版本
正常安裝步驟如下:
[root@localhost ~]# yum install gcc [root@localhost ~]# cd /usr/local [root@localhost local]# wget http://download.redis.io/releases/redis-6.0.1.tar.gz [root@localhost local]# tar -xvf redis-6.0.1.tar.gz [root@localhost local]# cd /usr/local/redis-6.0.1/ [root@localhost redis-6.0.1]# make PREFIX=/usr/local/redis install
這里報了如下錯誤
make[1]: *** [server.o] 錯誤 1
make[1]: 離開目錄“/usr/redis-6.0.1/src”
make: *** [all] 錯誤 2
server.c:2402:11: 錯誤:‘struct redisServer'沒有名為‘assert_file'的成員
server.assert_file = "<no file>";
^
server.c:2403:11: 錯誤:‘struct redisServer'沒有名為‘assert_line'的成員
server.assert_line = 0;
^
server.c:2404:11: 錯誤:‘struct redisServer'沒有名為‘bug_report_start'的成員
server.bug_report_start = 0;
^
server.c:2405:11: 錯誤:‘struct redisServer'沒有名為‘watchdog_period'的成員
server.watchdog_period = 0;
^
server.c:2411:11: 錯誤:‘struct redisServer'沒有名為‘lua_always_replicate_commands'的成員
server.lua_always_replicate_commands = 1;
^
server.c: 在函數‘restartServer'中:
server.c:2464:32: 錯誤:‘struct redisServer'沒有名為‘maxclients'的成員
for (j = 3; j < (int)server.maxclients + 1024; j++) {
^
server.c: 在函數‘adjustOpenFilesLimit'中:
server.c:2491:29: 錯誤:‘struct redisServer'沒有名為‘maxclients'的成員
rlim_t maxfiles = server.maxclients+CONFIG_MIN_RESERVED_FDS;
^
server.c:2497:15: 錯誤:‘struct redisServer'沒有名為‘maxclients'的成員
server.maxclients = 1024-CONFIG_MIN_RESERVED_FDS;
^
server.c:2529:53: 錯誤:‘struct redisServer'沒有名為‘maxclients'的成員
unsigned int old_maxclients = server.maxclients;
^
server.c:2530:23: 錯誤:‘struct redisServer'沒有名為‘maxclients'的成員
server.maxclients = bestlimit-CONFIG_MIN_RESERVED_FDS;
^
server.c:2554:59: 錯誤:‘struct redisServer'沒有名為‘maxclients'的成員
(unsigned long long) bestlimit, server.maxclients);
^
server.c: 在函數‘checkTcpBacklogSettings'中:
server.c:2574:48: 錯誤:‘struct redisServer'沒有名為‘tcp_backlog'的成員
if (somaxconn > 0 && somaxconn < server.tcp_backlog) {
^
server.c:2575:171: 錯誤:‘struct redisServer'沒有名為‘tcp_backlog'的成員
serverLog(LL_WARNING,"WARNING: The TCP backlog setting of %d cannot be enforced because /proc/sys/net /core/somaxconn is set to the lower value of %d.", server.tcp_backlog, somaxconn);
解決辦法:升級gcc版本
[root@localhost redis-6.0.1]# gcc -v # 查看gcc版本
[root@localhost redis-6.0.1]# yum -y install centos-release-scl # 升級到9.1版本
[root@localhost redis-6.0.1]# yum -y install devtoolset-9-gcc devtoolset-9-gcc-c++ devtoolset-9-binutils
[root@localhost redis-6.0.1]# scl enable devtoolset-9 bash
以上為臨時啟用,如果要長期使用gcc 9.1的話:
[root@localhost redis-6.0.1]# echo "source /opt/rh/devtoolset-9/enable" >>/etc/profile
再執行編譯:
[root@mmjredis redis-6.0.1]# make PREFIX=/usr/local/redis install
安裝成功會出現:Hint: It's a good idea to run 'make test' 😉
我們執行一下make test來進行測試一下
出現了如下錯誤:
[root@localhost redis-6.0.1]# make test
cd src && make test
make[1]: 進入目錄“/usr/redis-6.0.1/src”
CC Makefile.dep
make[1]: 離開目錄“/usr/redis-6.0.1/src”
make[1]: 進入目錄“/usr/redis-6.0.1/src”
You need tcl 8.5 or newer in order to run the Redis test
make[1]: *** [test] 錯誤 1
make[1]: 離開目錄“/usr/redis-6.0.1/src”
make: *** [test] 錯誤 2
解決辦法:
[root@localhost redis-6.0.1]# yum install tcl[root@localhost redis-6.0.1]# make test
測試成功如下:
先運行redis試一下:
[root@localhost redis-6.0.1]# /usr/local/redis-6.0.1/src/redis-server /usr/local/redis-6.0.1/redis.conf 32101:C 13 May 2020 17:01:48.248 # oO0OoO0OoO0Oo Redis is starting oO0OoO0OoO0Oo 32101:C 13 May 2020 17:01:48.248 # Redis version=6.0.1, bits=64, commit=00000000, modified=0, pid=32101, just started 32101:C 13 May 2020 17:01:48.248 # Configuration loaded 32101:M 13 May 2020 17:01:48.249 * Increased maximum number of open files to 10032 (it was originally set to 1024). _._ _.-``__ ''-._ _.-`` `. `_. ''-._ Redis 6.0.1 (00000000/0) 64 bit .-`` .-```. ```\/ _.,_ ''-._ ( ' , .-` | `, ) Running in standalone mode |`-._`-...-` __...-.``-._|'` _.-'| Port: 6379 | `-._ `._ / _.-' | PID: 32101 `-._ `-._ `-./ _.-' _.-' |`-._`-._ `-.__.-' _.-'_.-'| | `-._`-._ _.-'_.-' | http://redis.io `-._ `-._`-.__.-'_.-' _.-' |`-._`-._ `-.__.-' _.-'_.-'| | `-._`-._ _.-'_.-' | `-._ `-._`-.__.-'_.-' _.-' `-._ `-.__.-' _.-' `-._ _.-' `-.__.-'
二、后臺啟動
簡單修改后臺啟動
[root@localhost redis-6.0.1]# vim redis.conf
daemonize no 改成 daemonize yes
再來運行一下
[root@localhost redis-6.0.1]# /usr/redis-6.0.1/src/redis-server /usr/redis-6.0.1/redis.conf
30385:C 13 May 2020 16:57:58.918 # oO0OoO0OoO0Oo Redis is starting oO0OoO0OoO0Oo
30385:C 13 May 2020 16:57:58.918 # Redis version=6.0.1, bits=64, commit=00000000, modified=0, pid=30385, just started
30385:C 13 May 2020 16:57:58.918 # Configuration loaded
后臺運行成功,我們查看一下,并終止程序
[root@localhost redis-6.0.1]# ps -aux|grep redis| grep -v grep
root 29836 0.0 0.0 162416 7912 ? Ssl 16:56 0:00 /usr/redis-6.0.1/src/redis-server 127.0.0.1:6379
[root@localhost redis-6.0.1]# kill -9 29836
我們這里用到的是用后臺systemctl啟動redis
首先把redis加入service服務
vim /lib/systemd/system/redis.service
寫入
[Unit]
Description=redis
After=network.target[Service]
Type=forking
PIDFile=/var/run/redis_6379.pid
ExecStart=/usr/local/redis-6.0.1/src/redis-server /usr/local/redis-6.0.1/etc/redis.conf
ExecReload=/bin/kill -s HUP $MAINPID
ExecStop=/bin/kill -s QUIT $MAINPID
PrivateTmp=true[Install]
WantedBy=multi-user.target
注意路徑問題,以及PIDFile的路徑對應的是redis-6.0.1/src/redis-server里面的PIDFile
wq保存退出即可
接著運行以下
[root@localhost redis-6.0.1]# systemctl enable redis.service # 加入開機啟動
[root@localhost redis-6.0.1]# systemctl is-enabled redis.service # 查看開機是否啟動成功
enabled[root@localhost redis-6.0.1]# systemctl start redis #開啟redis服務
[root@localhost redis-6.0.1]# systemctl status redis //查看redis運行狀態
如果啟動出現問題,可以通過systemctl status redis來查看日志修復
如圖已經啟動成功
以上就是本文的全部內容,希望對大家的學習有所幫助,也希望大家多多支持腳本之家。
標簽:云南 佛山 畢節 南寧 晉中 衡水 巴中 安陽
巨人網絡通訊聲明:本文標題《Linux安裝Redis實現過程及報錯解決方案》,本文關鍵詞 Linux,安裝,Redis,實現,過程,;如發現本文內容存在版權問題,煩請?zhí)峁┫嚓P信息告之我們,我們將及時溝通與處理。本站內容系統采集于網絡,涉及言論、版權與本站無關。上一篇:Linux file命令的使用
下一篇:在后臺運行Linux命令的方法