前言
本文主要給大家介紹了關于golang 如何將多路復異步io轉變成阻塞io的相關內容,分享出來供大家參考學習,下面話不多說了,來一起看看詳細的介紹:
package main
import (
"net"
)
func handleConnection(c net.Conn) {
//讀寫數據
buffer := make([]byte, 1024)
c.Read(buffer)
c.Write([]byte("Hello from server"))
}
func main() {
l, err := net.Listen("tcp", "host:port")
if err != nil {
return
}
defer l.Close()
for {
c, err := l.Accept()
if err!= nil {
return
}
go handleConnection(c)
}
}
對于我們都會寫上面的代碼,很簡單,的確golang的網絡部分對于我們隱藏了太多東西,我們不用像c++一樣去調用底層的socket函數,也不用去使用epoll等復雜的io多路復用相關的邏輯,但是上面的代碼真的就像我們看起來的那樣在調用accept和read時阻塞嗎?
// Multiple goroutines may invoke methods on a Conn simultaneously.
//官方注釋:多個goroutines可能同時調用方法在一個連接上,我的理解就是所謂的驚群效應吧
//換句話說就是你多個goroutines監聽同一個連接同一個事件,所有的goroutines都會觸發,
//這只是我的猜測,有待驗證。
type Conn interface {
Read(b []byte) (n int, err error)
Write(b []byte) (n int, err error)
Close() error
LocalAddr() Addr
RemoteAddr() Addr
SetDeadline(t time.Time) error
SetReadDeadline(t time.Time) error
SetWriteDeadline(t time.Time) error
}
type conn struct {
fd *netFD
}
這里面又一個Conn接口,下面conn實現了這個接口,里面只有一個成員netFD.
// Network file descriptor.
type netFD struct {
// locking/lifetime of sysfd + serialize access to Read and Write methods
fdmu fdMutex
// immutable until Close
sysfd int
family int
sotype int
isConnected bool
net string
laddr Addr
raddr Addr
// wait server
pd pollDesc
}
func (fd *netFD) accept() (netfd *netFD, err error) {
//................
for {
s, rsa, err = accept(fd.sysfd)
if err != nil {
nerr, ok := err.(*os.SyscallError)
if !ok {
return nil, err
}
switch nerr.Err {
/* 如果錯誤是EAGAIN說明Socket的緩沖區為空,未讀取到任何數據
則調用fd.pd.WaitRead,*/
case syscall.EAGAIN:
if err = fd.pd.waitRead(); err == nil {
continue
}
case syscall.ECONNABORTED:
continue
}
return nil, err
}
break
}
//.........
//代碼過長不再列出,感興趣看go的源碼,runtime 下的fd_unix.go
return netfd, nil
}
上面代碼段是accept部分,這里我們注意當accept有錯誤發生的時候,會檢查這個錯誤是否是syscall.EAGAIN
,如果是,則調用WaitRead將當前讀這個fd的goroutine在此等待,直到這個fd上的讀事件再次發生為止。當這個socket上有新數據到來的時候,WaitRead調用返回,繼續for循環的執行,這樣以來就讓調用netFD的Read的地方變成了同步“阻塞”。有興趣的可以看netFD的讀和寫方法,都有同樣的實現。
到這里所有的疑問都集中到了pollDesc上,它到底是什么呢?
const (
pdReady uintptr = 1
pdWait uintptr = 2
)
// Network poller descriptor.
type pollDesc struct {
link *pollDesc // in pollcache, protected by pollcache.lock
lock mutex // protects the following fields
fd uintptr
closing bool
seq uintptr // protects from stale timers and ready notifications
rg uintptr // pdReady, pdWait, G waiting for read or nil
rt timer // read deadline timer (set if rt.f != nil)
rd int64 // read deadline
wg uintptr // pdReady, pdWait, G waiting for write or nil
wt timer // write deadline timer
wd int64 // write deadline
user uint32 // user settable cookie
}
type pollCache struct {
lock mutex
first *pollDesc
}
pollDesc網絡輪詢器是Golang中針對每個socket文件描述符建立的輪詢機制。 此處的輪詢并不是一般意義上的輪詢,而是Golang的runtime在調度goroutine或者GC完成之后或者指定時間之內,調用epoll_wait獲取所有產生IO事件的socket文件描述符。當然在runtime輪詢之前,需要將socket文件描述符和當前goroutine的相關信息加入epoll維護的數據結構中,并掛起當前goroutine,當IO就緒后,通過epoll返回的文件描述符和其中附帶的goroutine的信息,重新恢復當前goroutine的執行。這里我們可以看到pollDesc中有兩個變量wg和rg,其實我們可以把它們看作信號量,這兩個變量有幾種不同的狀態:
- pdReady:io就緒
- pdWait:當前的goroutine正在準備掛起在信號量上,但是還沒有掛起。
- G pointer:當我們把它改為指向當前goroutine的指針時,當前goroutine掛起
繼續接著上面的WaitRead調用說起,go在這里到底做了什么讓當前的goroutine掛起了呢。
func net_runtime_pollWait(pd *pollDesc, mode int) int {
err := netpollcheckerr(pd, int32(mode))
if err != 0 {
return err
}
// As for now only Solaris uses level-triggered IO.
if GOOS == "solaris" {
netpollarm(pd, mode)
}
for !netpollblock(pd, int32(mode), false) {
err = netpollcheckerr(pd, int32(mode))
if err != 0 {
return err
}
// Can happen if timeout has fired and unblocked us,
// but before we had a chance to run, timeout has been reset.
// Pretend it has not happened and retry.
}
return 0
}
// returns true if IO is ready, or false if timedout or closed
// waitio - wait only for completed IO, ignore errors
func netpollblock(pd *pollDesc, mode int32, waitio bool) bool {
//根據讀寫模式獲取相應的pollDesc中的讀寫信號量
gpp := pd.rg
if mode == 'w' {
gpp = pd.wg
}
for {
old := *gpp
//已經準備好直接返回true
if old == pdReady {
*gpp = 0
return true
}
if old != 0 {
throw("netpollblock: double wait")
}
//設置gpp pdWait
if atomic.Casuintptr(gpp, 0, pdWait) {
break
}
}
if waitio || netpollcheckerr(pd, mode) == 0 {
gopark(netpollblockcommit, unsafe.Pointer(gpp), "IO wait", traceEvGoBlockNet, 5)
}
old := atomic.Xchguintptr(gpp, 0)
if old > pdWait {
throw("netpollblock: corrupted state")
}
return old == pdReady
}
當調用WaitRead時經過一段匯編最重調用了上面的net_runtime_pollWait函數,該函數循環調用了netpollblock函數,返回true表示io已準備好,返回false表示錯誤或者超時,在netpollblock中調用了gopark函數,gopark函數調用了mcall的函數,該函數用匯編來實現,具體功能就是把當前的goroutine掛起,然后去執行其他可執行的goroutine。到這里整個goroutine掛起的過程已經結束,那當goroutine可讀的時候是如何通知該goroutine呢,這就是epoll的功勞了。
func netpoll(block bool) *g {
if epfd == -1 {
return nil
}
waitms := int32(-1)
if !block {
waitms = 0
}
var events [128]epollevent
retry:
//每次最多監聽128個事件
n := epollwait(epfd, events[0], int32(len(events)), waitms)
if n 0 {
if n != -_EINTR {
println("runtime: epollwait on fd", epfd, "failed with", -n)
throw("epollwait failed")
}
goto retry
}
var gp guintptr
for i := int32(0); i n; i++ {
ev := events[i]
if ev.events == 0 {
continue
}
var mode int32
//讀事件
if ev.events(_EPOLLIN|_EPOLLRDHUP|_EPOLLHUP|_EPOLLERR) != 0 {
mode += 'r'
}
//寫事件
if ev.events(_EPOLLOUT|_EPOLLHUP|_EPOLLERR) != 0 {
mode += 'w'
}
if mode != 0 {
//把epoll中的data轉換成pollDesc
pd := *(**pollDesc)(unsafe.Pointer(ev.data))
netpollready(gp, pd, mode)
}
}
if block gp == 0 {
goto retry
}
return gp.ptr()
}
這里就是熟悉的代碼了,epoll的使用,看起來親民多了。pd:=*(**pollDesc)(unsafe.Pointer(ev.data))
這是最關鍵的一句,我們?cè)谶@里拿到當前可讀時間的pollDesc,上面我們已經說了,當pollDesc的讀寫信號量保存為G pointer時當前goroutine就會掛起。而在這里我們調用了netpollready函數,函數中把相應的讀寫信號量G指針擦出,置為pdReady,G-pointer狀態被抹去,當前goroutine的G指針就放到可運行隊列中,這樣goroutine就被喚醒了。
可以看到雖然我們?cè)趯憈cp server看似一個阻塞的網絡模型,在其底層實際上是基于異步多路復用的機制來實現的,只是把它封裝成了跟阻塞io相似的開發模式,這樣是使得我們不用去關注異步io,多路復用等這些復雜的概念以及混亂的回調函數。
總結
以上就是這篇文章的全部?jī)?nèi)容了,希望本文的內容對大家的學習或者工作具有一定的參考學習價值,如果有疑問大家可以留言交流,謝謝大家對腳本之家的支持。
您可能感興趣的文章:- Go語言同步與異步執行多個任務封裝詳解(Runner和RunnerAsync)